|
Post by chrisinkc on Mar 21, 2016 18:05:43 GMT
Has anybody else run into the issue of access to the web interface just stops working? I checked with the openhouse.org site and they are not having any issues.
Everything has been working fine until I tried to open up my IOS app. It couldn't connect so I tried going to the my.openhab.org website. That just timed out as well. Its behaving as if my system can't communicate to the my.openhab system.
I am at work now, so I can't test a lot, but I can still remote access into a home computer and then from there remote access to my Pi2 running Openhab. I can see the log files and everything looks like it is working just fine except when I access my.openhab.com I do not see the corresponding activity in the log file showing the remote access.
I stopped the openhab service and then restarted the service. No change. I then rebooted the Pi and logged back in. No change.
This was all working just fine when I went to bed last night. Now it isn't. Very frustrating!
I did some searching and there are a lot of discussions of the SD card becoming corrupt after so many read/writes. Could this be the issue? I have only been running this setup for about 2 months now.
Anybody have any ideas?
|
|
|
Post by chrisinkc on Mar 21, 2016 18:45:37 GMT
OK, I went in and decided to do an update/upgrade command just to see if that would help. It did not make a difference for about 10 minutes, then all of the sudden I started getting openhab notifications via my IOS app and now I can access via my.openhab.org again.
The issue is gone, but I still want to know what the heck caused it!
|
|
|
Post by greginkansas on Mar 22, 2016 0:08:23 GMT
|
|
|
Post by greginkansas on Mar 22, 2016 1:07:43 GMT
|
|
|
Post by chrisinkc on Mar 26, 2016 2:23:44 GMT
Greg, Thanks for adding those links! I ordered both and should have them by Wed. I also upgraded my SD card. Now I know why the $5 SD cards at Microcenter are $5! I bought a $12 ScanDisk card and I went from about 1.2MB upload speeds to almost 4MB! While I am making these changes, I am also going to upgrade the Pi 2 with a Pi 3. Hope to have this all in place by the end of next week.
|
|
|
Post by greginkansas on Mar 26, 2016 11:13:13 GMT
The SSDs give more peace of mind but I still use github.com/billw2/rpi-clone and good cards. On you next trip to Microcenter any chance you would get me some PI zero's
|
|