Joshua
Junior Member
Posts: 75
|
Post by Joshua on Jan 13, 2018 21:04:12 GMT
|
|
|
Post by papa on Jan 14, 2018 3:17:23 GMT
Thanks, Joshua, for bringing the Feather to our attention. I briefly looked at the specs & tutorial. From that, it looks like (maybe with some tweaking) that our sketches may work with the Feather. One can use the Arduino IDE to program the Feather's microprocessor. This site gives changes that need to be made in sketches like ours. The Anarduino Miniwireless & lowpowerlab.com's Moteino are two other devices with built on RFM69 radios & RAM memory. Over the Air (OTA, wireless) programming has been worked out for both of those. Maybe it has been or will be for the Feather. (I have used & written threads on using the Miniwireless, including OTA programming.) If you try the Feather, please report back to the forum on your evaluation & what you did with it.
|
|